What are the opening hours?

Monday 8am - 6pm Tuesday 8am - 6pm Wednesday 8am - 6pm Thursday 8am - 6pm Friday 8am - 6pm

https://www.facebook.com/104888028232806/

C&R Restoration and Mechanical

Home
United Kingdom
Melton Mowbray
C&R Restoration and Mechanical

Directions Contact the business

Specialists in vehicle restoration, welding, mechanical repairs, and underbody work.

From routine maintenance to full rebuilds, we take pride in delivering reliable, high-quality workmanship.

13/10/2026

It's been a long while since we've posted, so thought I'd give an update on some of the work we've done recently.

Custom made winch mount for a trailer done quickly for a customer that needed it.

1989 honda prelude in for welding repairs. This one had been previously bodged, and was far worse than expected. No panels are available for this car so everything was made by hand and done by eye. More updates on this one soon as the customer has asked us to do something quite fun with the car next!

Honda MB6 Vti in for welding and an underside resto. Again this one was previously bodged and rust hidden, and was far, far worse than expected. However I like a challenge and we managed to save this one from the scrapyard.

1991 Mk1 mx5. This one was in for welding and a complete nut and bolt resto, underseal and some mechanical work. The subframes were removed, blasted and powdercoated. Along with the new arms the customer asked us to fully polybush the suspension too. Alot of work went into this and we are proud of the outcome 🙏

Toyota celica GT in for an underseal package and mechanical work to pass an mot. This one was quite clean and needed no welding, so the rust prevention and underseal we did will protect the car for many more years to come

And a load of misc mot welding repairs. This is just some of the work we've done lately, and doesn't include all the mechanical work we do on a daily basis also!

So whether you need welding repairs, rust prevention, mechanical repairs or just routine maintenance we do it all!

17/05/2026

Just a catch up post as we've been very very busy first month of being in the new unit!

Not only have we been setting up, building the office and putting in ramps ect, we've been straight into the deep end with work smashing it out.

To name some jobs we've done:
Engine replacement on an audi a1 tfsi, with the donor engine fully refreshed with a new timing chain kit, full service and a load of other bits.

Engine rebuild on a 1.2 turbo twingo with a blown head gasket. Full engine refresh on that too and a full service

Mot fail welding repairs on a camper van

Clutch replacement on a Citroën Picasso that literally had no material left on the disc and wouldn't move at all. Dual mass was badly worn too and replaced

Full wet belt replacement and service on a transit van, including sump, timing cover, oil and water pump using all genuine ford parts

And various other jobs like general repairs and servicing, custom exhaust work, ect.

We currently have an mb6 in for a full refurb, everything removed underneath with lots of welding and a full underseal and resto package. A big job but we will post separately on that when its done 😎

We have some amazing jobs and cars lined up, leading upto summer we'll start posting more once we're settled in fully and show the amazing work we do!

We've got some big plans for the future as the business is growing quicker than expected, no job too big or small we'll take it on!

Thank you to all the support from everyone involved including company sponsors and customers, family and friends, ect. Month 1 has been stressful but all for the good.

If you need any work doing, from general repairs to full restorations or even just advice, our inbox is always open to anyone.

Here's to the rest of 2026, watch this space!

10/04/2026

Just a quick job we did on a trailer for a customer.

The battery tray support beam was completely rotten, and not even connected on the other side. Not only that the front chassis support beams were so corroded they werent even connected on one side!

The support beams were replaced with stronger and thicker material to last a long time (they were causing creaking before being replaced which has now gone away)

Also the battery tray support beam was completely replaced and lowered at customer request so he can fit a battery cover. Also the other side was connected which was just cut and left to bounce around before.

Goes to show we don't just work on cars and the like, if you need any sort of welding work done and it can fit in our big unit then we'll take it on! 😎

~R

06/04/2026

Guys we're fully up and running in the unit!

Why choose us? We are a fully limited and VAT registered company, and fully insured which covers customer cars and the like.

We are fully qualified experienced mechanics from anything to small servicing to full engine rebuilds and big power builds.

I'm also a certified welder with experience from structural commercial welding and automotive with the highest level of detail and quality! We are also underbody and rust preventative specialists.

Over the next coming months our work will speak for itself and we've got some very tasteful cars and work coming in.

Look no further, your car will be in the best of hands. We are huge car enthusiasts with lots of knowledge and treat customer cars like they are our own. 🫶

~R

17/03/2026

Just an update on the business to avoid any confusion as theres been some changes.

We are now a limited company and fully insured with a permanent workshop as we've quickly outgrown being a sole trader.

With this we are able to offer much more to our customers than before and be able to complete projects more quickly and efficiently.

The name has also changed from RMA to C&R.

We now also offer mechanical work from maintenance all the way up to full rebuilds ect.

Our new address is: UNIT 1A THORPE ROAD
MELTON MOWBRAY
UNITED KINGDOM LE13 1SQ.

We are blessed to have quite a large unit with upto 50 car parking spaces. Yes 50!

We will host an open day in the next coming months for people to come see the amazing work we do and get to meet some new faces and their projects.

Thank you all, it's been an amazing start to the year and we've got some incredible projects to come in. Watch this space!

~R

08/03/2026

Recent project completed on a customers M sport bmw Z3 🤝

All 4 jacking points were completely rotten out, hidden underneath the outer sill panels. If this was left much longer it would've spread to the floor of the car requiring much more costly repair. The reason why these get so bad is bmw didn't put proper drain holes in the inner sill, which traps moisture.

As some may know it's impossible to buy any repair panels for these, so everything had to be hand fabricated!

The repair was done as oem as possible, with the addition of adding drain channels as a preventative measure. The customer also opted for a very basic strip and underseal package to protect the underside.

The customer will be back with us when we've settled into the new unit for some aftercare and final touches!

If you require any welding or restoration work, big or small, feel free to contact us. Even if it's just for advice, we love to help out as much as possible.

~R

23/02/2026

⭐️HUGE ANNOUNCEMENT⭐️

We're making massive steps forward in the business! I'm happy to announce we have secured a permanent workshop to increase productivity and do more amazing things with peoples projects.

With this, we will be doing a slight rebrand and can offer more services to our customers. We will still be doing the same style of restoration work, welding, underseal ect. But with that can take on bigger projects and get them done in a more timely fashion.

Things have been a little quiet on here recently, but in the background we have some big projects currently being done and are yet to come in to us. I will post them on here as the time comes.

It's a great start to 2026 and we only have you guys to thank. Whether it's previous, current or future customers you've helped us build something amazing. And we wanna share that passion of cars and projects back to you guys!

27/01/2026

Always worse than it looks from the outside!

Got a rusty car that needs some love? Or need to prevent the worst from happening? Get in touch! We'll beat almost any quote 😎

22/01/2026

Got a very big announcement coming up soon! This will be a step up for the business, with some major changes but our scope will remain the same. A big emphasis on 'Our' as a clue!

Once the news drops we will be offering a limited sale on our package deals as a thank you, with a revised menu for any future work we carry out.

We are mostly booked now until end of spring for any big projects, but have spaces available for any general welding/underseal work required. Get in touch!

18/01/2026

First underseal job of the year completed!

This customers CRZ was in serious need of an underside strip and underseal package, as you can see Honda were very conservative with how much underseal and seam sealer they used from factory. In fact, most seams on this car were not protected at all. If this was left for however many more years down the line it would have needed a fair bit of welding, but thankfully was caught just in time and cleaned up quite well.

The car was completely stripped back to bare metal and all rust/old underseal removed. This is the only correct way to do it and also gives a clear indication if any welding is required. Sometimes rust can be hidden or be worse than it looks on the surface.

With a clean slate, the car is coated in rust convertor to neutralise the metal. After this, the underside is hand painted with corroless glass reinforced primer. This leaves a rustproof, protective primed layer that any moisture or rust can't pe*****te into. This goes on with a few coats over time to make sure it's covered properly.

The seams are then sealed with a factory spec seam sealer. Not the cheap brush on style seam sealer that is prone to shrink and crack when it dries. Only top quality products are used throughout!

After all this is left to cure, then the top coat is sprayed on throughout, making sure not to overspray on anything at all. Brake and fuel lines are left completely paint free to make sure they can be properly monitored over time (and save having an mot advisory).

Finally, after the top coat is cured any box sections and drain holes ect are sprayed with cavity wax to protect them from the inside.

Need to protect your car from any rust and corrosion down the line? Look no further, we are highly competitive and mobile if required. We are so confident in our work we offer a minimum 10 years warranty!

We can also carry out any welding work required, no job too big or too small. Whether it's a quick mot repair or a full on restoration, you can be rest reassured your car is left in the best of hands.

Address

Unit 1a Melton Business Park, Thorpe Road
Melton Mowbray
LE131SF

Opening Hours

Monday	8am - 6pm
Tuesday	8am - 6pm
Wednesday	8am - 6pm
Thursday	8am - 6pm
Friday	8am - 6pm

Website

facebook.com

Alerts

Be the first to know and let us send you an email when C&R Restoration and Mechanical posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.