Willis Welding and Fabrication Inc.

Call Contact the business

Willis Welding and Fabrication Inc. Shop/Mobile welding
24 hr. service
alum, steel, stainless, exotic metals
X-ray/UT pipe,stru,certs

Some work we did for a local company over the last month and a half. Thanks to all who helped out on this one.Food grad...
10/19/2026

Some work we did for a local company over the last month and a half. Thanks to all who helped out on this one.

Food grade stainless process piping,steam lines,blast chutes, deluge flood piping , CIP lines, 6k psi high pressure feed lines, downflow rooftop unit, duct work, make up air filter racks, mesh catch screens for batch tanks, metal decking with ladder added for clean outs , and more to come on this project in the next couple weeks

08/30/2026

Looking for an industrial plumber/fitter. Job starting asap. Must be fully tooled and insured. Experienced working with 1/2"-4" lines, black pipe/ stainless/2" pex

Also looking for welder/fitter. Must have 2 years experience welding/fitting sanitary stainless piping autogenous process and stainless steel steam piping open root with back purge. 1099 or w2 work

Local work Wilkes Barre area . Will need valid drivers license. Pm or call business to find out more details or call me directly with a reference. Pay based on experience/proof of work

Altoona Pa, power plant shutdown. Replaced tire pads and keepers on both ends of drum, trunnions, chain and sprocket. J...
08/21/2026

Altoona Pa, power plant shutdown. Replaced tire pads and keepers on both ends of drum, trunnions, chain and sprocket. Johnstown Pa not far from the job has an incline car like Pittsburgh and canals from the industrial days. Cool to see but (not my pic) it was closed at the time for upgrades

Cooler drum assemblies
08/21/2026

Cooler drum assemblies

Spiral staircase and railing we finished up last month.
10/24/2025

Spiral staircase and railing we finished up last month.

One of the larger projects we worked on this summer. Jacking this rotary kiln in position. Removing old broken down tru...
08/21/2025

One of the larger projects we worked on this summer. Jacking this rotary kiln in position. Removing old broken down trunnions, installing new base frame and new trunnions to get it turning again.

Here is an alum livewell we built for a customer. He brought the boat to us after previously having it at another shop t...
08/20/2025

Here is an alum livewell we built for a customer. He brought the boat to us after previously having it at another shop to do the same job. Unfortunately for him, it didn't turn out as planned so he called us to see if we could fix it. It took some planning to work thru the mess but we got it done and sent him on his way.

You can see from the last few pictures the work that was done and needed to be replaced. We cut it all back out and started over. Lots of people say they can do things these days, theres nothing wrong with asking for some proof of work or references before spending your money.

Installation of some ADA complaint railing we fabricated before the holidays. More to come on this job.
02/05/2025

Installation of some ADA complaint railing we fabricated before the holidays. More to come on this job.

Some projects we were working on lately. Dumpster lid, cable reels, base frame modifications, hastelloy drums w/ stands,...
12/24/2024

Some projects we were working on lately.
Dumpster lid, cable reels, base frame modifications, hastelloy drums w/ stands,stainless parts, structural columns and the start of a custom railing job

2016 Rzr 1000 Turbo came to us for a repair. Clutch bolt broke off at the threads about 2" down into the crank. Previou...
11/14/2024

2016 Rzr 1000 Turbo came to us for a repair. Clutch bolt broke off at the threads about 2" down into the crank. Previous attempts by others left an easy out, spiral extractor and drill bit snapped off down in the bore. We made custom drill guides and used full carbide bits and endmills to cut through the hardened material and remove the remaining threads from the crank.

It also needed a new crank seal, so we cleaned up the housing, smoothed out the gouges and installed a seal that would work with this amount of damage to the case. This saved the customer from removing the engine, buying a new case and crank.

Address

Sugar Notch, PA

Telephone

+15708559187

Website

Alerts

Be the first to know and let us send you an email when Willis Welding and Fabrication Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Willis Welding and Fabrication Inc.:

Shortcuts

Share