Evolve Interiors

Home
Australia
Kyneton, VIC
Evolve Interiors

Call Directions Website Contact the business

The Evolve Group, Interiors & Stone - Our Consult, Design and Build Methodology Deliver Impeccable Results For Clients.

Evolve Interiors - Joinery & Cabinet Maker

22/10/2026

Hawthorn. The butler’s pantry and laundry at Hermon, a WOWOWA Architecture house, run straight on from the kitchen. Evolve Interiors made the joinery along it, with the ovens and storage built into one full-height run.

Architecture by W O W O W A
Build by Basis Builders
Joinery and stone by Evolve
Photography by Martina Gemmola

http://evolveinteriors.net.au

16/10/2026

Evolve Group was fortunate enough to win the 2026 Australian Cabinet & Furniture Association (ACFA) Industry Awards for Best Bathroom Renovation. The winning project was North Terrace, Clifton Hill, one of three categories in which the team was selected as a finalist this year. 
The North Terrace bathroom brought together terrazzo tiling, walnut joinery, a travertine vanity benchtop, brass fixtures and reeded glazing as one coordinated fitout, the standard the judges were assessing against. A result like this reflects the whole team, from design through fabrication and install.
 Builder Frame Works  Architect Kennedy Nolan
 http://evolveinteriors.net.au 

11/10/2026

At Evolve, joinery and stone are made under one roof in Kyneton, by one team, from design through to install.

One point of contact, one production schedule, the same standard held across both disciplines, with nothing lost in a handoff between separate trades.

http://evolveinteriors.net.au

08/10/2026

In the Evolve Stone workshop, stone slabs are cut on a CNC bridge saw with a continuous water feed running directly onto the blade and the cutting line, not just cooling it from above.

That constant flow keeps the cutting interface from overheating, which is what prevents thermal shock and micro-cracking along the cut line, the kind of damage that can show up later as a defect in a finished piece.

https://www.evolveinteriors.net.au/stone-supply2

06/10/2026

This coffee table was made for Fantales, a design collaboration between Laminex and YSG Studio. The top is a two-colour lamination: the whole surface was laminated in Laminex Pillarbox first, then the centre was routed out and a separately cut piece of Laminex Kalamata glued precisely into that opening. The base is Tasmanian oak veneer over a shaped MDF frame, with solid oak legs.

For a two-tone laminate piece like this, that inlay sequence is what keeps the border line continuous and crisp all the way around.

Interior Design by Y S G
Joinery by Evolve.

https://www.evolveinteriors.net.au/fantales-x-laminex

04/10/2026

At our Kyneton workshop, joinery panels go through CNC machining in a single setup: cut, grooved and drilled for hardware all in one pass, rather than moved between separate machines for each step.

That accuracy carries into the next stage, handling, assembly and install, all done in-house by Evolve’s own team, so there’s less chance for an error to carry through from machining to the finished piece.

http://evolveinteriors.net.au 

02/10/2026

Hermon’s kitchen runs on a deliberate colour and material brief, a nuanced depiction of the Australian landscape, with the room set up as the home’s focal point.

The joinery carries that colour through in a rich, saturated palette, finished with an avocado resin benchtop, while a separate ground-back coloured bench shows the same craft in a different material.

The same striking colour-blocking runs through the rest of the house, so this kitchen is one room in a much larger material language.

Architecture by W O W O W A
Build by Basis Builders
Joinery and stone by Evolve
Photography by Martina Gemmola

https://www.evolveinteriors.net.au/hermon-house

24/09/2026

Before/After: The Evolve team built this meeting table for the Laminex x Kennedy Nolan Workplace collaboration.

The tabletop is a skeleton of MDF ribs, half-overlapped at the centre for strength, encased in bending plywood. Its curve was tighter than the plywood's rated radius, so the ply was wet, ironed and steamed to take the shape before the piece was laminated in Laminex Enamel and Pillarbox, legs first, then the flat ends, then the tabletop, so the joins disappear.

We’re proud to note that Laminex have trusted Evolve with collaborations since 2019.

Architect: Kennedy Nolan
Campaign: Laminex AU
Creative Direction: Ortolan
Stylist: Natalie James
Photographer: Derek Swalwell

http://evolveinteriors.net.au

22/09/2026

Precision flows through each stage of our cabinetry projects, from the CAD file to the CNC-cut panel, to the assembly and installation by our trusted team.

Visits to the Kyneton stone and interiors workshop are encouraged, so you can see firsthand what our team is capable of.

http://evolveinteriors.net.au

21/09/2026

Coordinating stone and joinery as two separate suppliers usually means reconciling two sets of measurements and two schedules. We build both in the same workshop instead. Swipe through to see what that actually removes from your plate.

https://www.evolveinteriors.net.au/

Address

1664 Kyneton Metcalf Road
Kyneton, VIC
3444

Telephone

+61354222571

Website

http://www.evolveinteriors.net.au/

Alerts

Be the first to know and let us send you an email when Evolve Interiors posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Evolve Interiors:

Want your business to be the top-listed furniture store in Kyneton?