Stain Go is a fully Australian made and owned liquid carpet cleaner, developed by leading Australian industrial chemists. Your jewellery will really sparkle.
Stain Go is gentle on fabrics and is guaranteed not to remove or bleach colour. Stain Go can therefore be used as a soaker with any colour fast fabrics. Stain Go has an alkaline pH and uses the highest grade surfactants, detergents and solvents. Stain Go is primarily used for carpets, however, it may also be used on any colour fast fabric such as satins, velvets,
cottons, wools and synthetics. For
example clothes, furniture, car seats etc. Stain Go may be used in steam cleaning machines and other such wet carpet cleaners such as “Vax”, “Kirby”, “Lux”, and
“The Carpet Doctor” to name a few. It is suggested when using Stain Go in this manner that stains be pre-treated with a
neat solution of Stain Go before cleaning. It is also suggested that a “defoaming” solution be added to the Stain Go /
water mix (1 part Stain Go to 20 parts water) to help reduce excessive foaming. Defoaming products can be purchased
from most supermarkets. Other Uses for Stain Go:
Clothes: Stain Go should be used as a pre-stain remover for clothes. Spray stained area and
allow to soak before washing. Cleaning Spectacles: Simply spray onto lenses, rub with fingers, rinse with warm water and towel dry. Windows & Mirrors: Spray onto windows and wipe with a damp cloth, buff dry with a clean dry towel. Better results can be achieved when using a window squeegee. Car Windows: Add 1/2 cup to windscreen washer water bottle and top up with water. This will not
effect duco and will keep windscreen free from road grime & greases. Jewellery Cleaning: Stain Go is a must for cleaning your jewellery. Simply place jewellery into a jar and
cover with 2cm’s of Stain Go, leave to soak, remove from jar and give it a light rub
with an old toothbrush to help get into all those hard to get at spots, rinse under hot
water. Stain Go is safe for all gold and silver. (Not for pearls). Showers: To remove body fats and soap scum, spray onto tiles and glass, rub with a nonabrasive
scourer and leave for 60 seconds. Rinse with hot water. Bench tops: Spray the stained area lightly and leave to soak. If stain persists repeat application,
for very hard stains use a mix of 1 part bleach to 1 part Stain Go and leave for 60
seconds. Some bench top stains may not be removed with Stain Go. Stain Go may
perform better on laminex. More difficulties may be found on marble, terrazo,
melamine, slate and porous surfaces. N.B. Difficulty may be experienced when cleaning woollen fabrics due to the microscopic hooked fibres
that tend to hold stains longer than synthetics. Stain Go has an unlimited shelf life and will not “go off” or deteriorate with age.
