Anji M&C furniture Co.,Ltd., 安吉县递铺镇阳光大道198号, Anji (2026)

Q: What is the address?

安吉县递铺镇阳光大道198号

09/10/2026

Back Pain After Long Gaming Sessions? What MC196-2-1 Adjusts

Back pain after long gaming sessions usually isn't caused by one bad posture. It comes from a chair that only holds one position.

Three comfort gaps tend to show up:

Neck support that doesn't move with you. The MC196-2-1 has a height-adjustable headrest, so the neck angle can change when you shift.

Legs with nowhere to rest. A retractable footrest extends when you want to lean back instead of sitting upright.

One seat angle for everything. The chair offers 3 locking tilt angles and a seat cushion that adjusts forward and backward.

It's built by Maochang Furniture as an exclusive game chair for home and office use, sized W70 x D70 x H118-128 cm, with a CNIPA design patent (ZL 2025 3 0581799.7). Adjustment isn't a medical fix — it just removes the fixed-position problem.

07/10/2026

Behind the Stream: A Creator's Night With the MC196-4 at Home

It's 11:40 PM. Ring light still on, chat still scrolling, and the last thing you want is a chair that squeaks every time you shift your weight.

That's the setup the MC196-4 was built around.

The first thing people notice is the look. There's a spider element design worked into the back, and pink embroidered lines run across it — quiet under normal room light, a lot more visible once the stream lighting hits. It's a visual hook you don't have to explain to your viewers.

Movement matters more than most people expect in a home stream setup. Between the desk, the mic arm, and the camera, a creator rolls back and forth dozens of times a night. The MC196-4 sits on 60mm large casters — smooth and quiet across different floor types. No scraping noise halfway through a sentence.

Then there's the long stretch. A stream isn't 45 minutes, it's four hours, sometimes six. So a few things are doing work here: a spring-loaded seat cushion that holds its shape instead of sagging into a flat spot, 2D adjustable PU-padded armrests you can raise or angle to match your desk height, and an up/down adjustable headrest for the neck during those long "just chatting" segments.

The segmented backrest is the detail that ties the whole design together — separate panels instead of one flat surface, which is also what gives the embroidered lines somewhere to sit.

Breaks are where the retractable footrest earns its place. Pull it out, lean back, lock the recline at one of three positions, and take ten minutes off-camera without migrating to the couch. Push it in and it's gone.

Quick size check for anyone measuring a small room: 68cm wide, 69cm deep, 122–132cm high. Materials are PU, metal, and plastic, and it's listed for gaming, home, and live streaming use.

Maochang Furniture is a gaming chair and office chair manufacturer based in Anji County, Zhejiang, with export markets that include the EU and the US.

So, if you stream from a bedroom or a corner desk — what's the one thing your current chair gets wrong? The squeak, the cushion, or the recline?

06/10/2026

Gaming Chair or Gaming Sofa? Let's Talk About MC1040

Can a gaming chair double as a gaming sofa? Someone asked me that last week, and it's not a one-line answer — it depends on the chair.

MC1040 is a gaming chair that's classified as a gaming sofa. That's not a marketing label, it's the actual category on the spec sheet. The numbers explain why: W80 x D72 x H119 cm. Wider and lower than a typical racing-style chair, and that shape changes how you use it.

What actually changes when a seat gets wider and lower?

You stop perching and start sitting in it. There's a soft cushion on the back, and the seat has a coiled spring inside, so there's more surface to settle into over a long session. The armrests are height-adjustable — drop them for a movie, raise them for keyboard work. It reclines up to 180 degrees too.

It also moves differently. Silent casters with lockable wheels matter more than they sound, especially in a live streaming corner where you don't want the chair creeping out of frame. The footrest folds away when it's not in use.

Built for home, office and live streaming setups. Metal frame, PU and PVC upholstery, 27.4 kg net weight, 150 kg weight capacity — that last number is the one people ask about once a chair has let them down before.

For anyone importing or stocking these, the boring numbers are the useful ones:
Carton size: 82 x 60 x 60 cm
Loading quantity: 227 pcs, 1 pc per carton

A wider footprint takes more floor space at home and more pallet space in a container. Neither is a dealbreaker, but both are worth knowing before you book the order.

So does it replace your sofa? Not the three-seater in the living room. But if you game, work and watch everything from the same spot, "chair" and "sofa" start to feel like labels more than different things.

MC1040 comes from Anji Maochang Furniture Co., Ltd. — a chair factory in Anji County, Zhejiang, China, established in 2016, making gaming chairs, office chairs and manicure chairs, with 98% of sales going to export markets.

Real question for the room: what's actually in your setup right now — a chair, or something you can stretch out on? I'm curious whether most people even have the floor space for the wider option.

03/10/2026

Gaming and Streaming, One Chair: MC1034

A lot of live streamers don't have a gaming room and a work room. They have one desk, one camera, and one chair that has to survive a long ranked session and then a three-hour stream without turning into a backache by hour two.

That's the gap we built MC1034 for.

MC1034 is a racing-type chair from Anji Maochang Furniture Co., Ltd., a chair factory in Anji County, Zhejiang, China, making game chairs, office chairs and manicure chairs since 2016. Around 98% of what we produce goes to export markets — mainly the EU, USA, Thailand, Brazil and South Korea.

Three things on this model worth a closer look:

The footrest folds out. For streamers that matters more than it sounds. During gameplay you sit forward. Between matches, while you're reading chat or reacting to a clip, you lean back. A foldable footrest lets you switch, and it tucks away when desk space is tight.

The head pillow adjusts up and down. We**am height, mic position, monitor angle — no two setups match. A pillow locked at one height pushes your neck into someone else's setup.

Then there's molded foam. This is the detail that decides whether a chair still holds its shape after a year of daily use. Foam that's molded rather than cut keeps its support where you actually sit, which is what buyers notice when they put a returned unit next to a fresh sample.

For importers and internet cafe operators, the boring parts matter just as much. Everything runs through one line — cutting, foam bonding, sewing, nailing, assembly — and plywood gets checked with tools for humidity before it's allowed into production. Skip that step and it shows up later as a moldy batch.

Terms are simple: MOQ 50 units, FOB Shanghai or Ningbo, pre-shipment test before goods leave, 30% deposit with the balance against a copy of the BL.

If you're lining up a chair that has to sell to gamers and streamers at the same time, MC1034 is worth a sample. Which one do your customers ask about first — the footrest or the pillow? Message us for bulk pricing or a sample and we'll send the numbers.

30/09/2026

MC196-1 LED Gaming Chair: Backrest Lighting That Stands Out

Your chair ends up in almost every frame when you stream. Might as well make it worth looking at. 🎮

Most illuminated gaming chairs do the same thing — a ring of light around the outer edge. Looks fine in a product photo, then kind of disappears once the seat is tucked behind a desk.

MC196-1 goes a different way.

On this model the LED strips don't just wrap the perimeter. They also run down the middle of the backrest, and that layout follows the segmented backrest design instead of cutting across it. The flowing lines and the panel splits line up. Nothing bolted on. The lighting is built into the design language of the chair.

A few concrete details, since people ask:

• Model MC196-1, LED gaming chair
• Size W67 x D70 x H124–132 cm
• Wooden frame construction — unlike conventional illuminated gaming chairs
• Material: fabric, metal, plastic
• 462 pcs per 1x40HQ, carton 75 x 61 x 32 cm, 1 pc / 1 carton

Why the middle strip matters more than it sounds: in a streaming corner or a small home gaming room, the backrest is the part the camera actually sees. An edge-lit chair gives you a glow around a silhouette. A backrest that carries light down its center gives the eye something to follow, and the segmented panels give it structure. Same seat, different presence on screen.

If you're furnishing a room rather than a single desk, that's the detail worth checking before you commit — the chair ends up in the shot whether you planned for it or not.

Anji Maochang Furniture (Maochang furniture) builds gaming chairs, office chairs and manicure chairs out of Anji County, Zhejiang, and exports most of what it makes. OEM/ODM work on logo, color, size and design is standard, with a 30–40 day lead time and a 50-unit MOQ.

Curious — does the back of your chair ever cross your mind when you're setting up a stream, or do you only notice it after it's already in the shot?

27/09/2026

Losing Your Posture by Hour Three? Here's the Recline Fix

Hour three is where it usually starts.

Your shoulders have crept forward, your lower back has slid down the seat, and your wrists are hovering in the air because you gave up on the armrests twenty minutes ago. Nothing about the game changed. You just ran out of comfortable positions.

That's not a discipline problem. It's a chair problem. A fixed back gives you one sitting position, so your body keeps inventing new ones — and none of them are good. Telling yourself to sit up straight buys maybe ten minutes.

The fix is having somewhere to go. On the MC1039-1, the 180-degree recline and the frog-type adjustable mechanism let you drop the back into a deeper angle mid-session, hold it for a while, then bring it up and reset. Same desk, same screen, different posture — and it takes seconds.

The 4D armrests work the same way. Nudge them up, in, or angled so your forearms actually rest, because shoulder tension usually starts right there. The soft back cushion spreads pressure across your upper back instead of digging into one spot, so leaning back doesn't turn into a fresh ache after twenty minutes.

We're Maochang Furniture (Anji Maochang Furniture Co., Ltd.), a gaming chair and office chair manufacturer in Anji County, Zhejiang Province, which industry data identifies as the leading global production base for gaming chairs. Our factory runs about 3,000 m² and ships roughly 75,000 chairs a year to Europe, the US, Thailand, Brazil and South Korea.

If you're comparing chairs before ordering, compare the parts you'll actually touch: how far the back reclines, whether the mechanism locks where you want it, how much the armrests move, and whether the foam keeps its shape. High-density mold foam in the 50–65 kg/m³ range is the common benchmark for chairs that don't flatten out after a month. We also humidity-check the plywood before it enters production, since damp board is how mold turns up later inside a container.

One price note worth knowing: compared with a regular LED game chair build, an upgraded structure carries about 10% more weight load capacity and costs roughly 8% more to manufacture. Lower failure rate, lower maintenance. That gap is what you're paying for.

Where does your posture break first — shoulders, lower back, or wrists?

24/09/2026

From Ranked Play to Office Work: MC196-3-1 at Home

Most gaming chairs get judged in a showroom. The real test is the corner of a bedroom or study, where a workday and a ranked match share the same desk.

Hybrid work-and-game chairs are already around 29.8% of the gaming chair segment. Spend one week in a room like that and the reason becomes obvious.

So here's a real setup with the MC196-3-1, a game type computer chair, and how a day in it actually goes.

Morning: upright. Your elbows land where they should, because the armrests are 2D adjustable — up/down to match the desk height, back/forth to match how close you sit. Seat height runs from 106 cm to 114 cm, so you can drop it low for typing or lift it if your desk sits high. Width is 66.5 cm, depth 69 cm. Measure that corner first, because a few extra centimeters of depth changes how roomy the whole space feels.

Afternoon: one call turns into a two-hour focus block. This is where the 3-position tilt-lock does the quiet work. Locked upright for typing, one notch back for reading, further back during a break. You're not fighting the recline, and you're not swaying in it either.

Evening: game on. Armrests shifted, backrest one notch looser, same seat. No chair swap, no mental switch between work mode and play mode.

It's fabric, PVC and PU over a metal frame, with foam and plastic parts — one piece per carton at 75×57×37 cm. Maochang Furniture, the Anji-based maker behind it, holds a CNIPA design patent (ZL 2025 3 0581799.7) covering this model, plus an FSC chain-of-custody certificate and a BSCI factory audit. Anji Maochang Furniture Co., Ltd. builds gaming, office and manicure chairs, and almost all of that output goes to export markets.

Quick one for you: does your desk corner run on one chair for both work and gaming, or are you still switching between two? Genuinely curious what your setup looks like.

22/09/2026

Maochang Furniture is Going Global ✨ See You at Cologne Furniture Fair 2025

Big news for our global friends and partners! This October, Anji Maochang Furniture Co., Ltd. will step onto the international stage once again and take part in the world-famous Germany Cologne Furniture Fair, officially starting on October 25.
For years, Maochang Furniture has focused on creating comfortable, stylish and durable home furniture that fits modern living lifestyles. We believe that good furniture is not only a decoration for the home, but also an important part of a high-quality life. We keep exploring new design trends, upgrading production craftsmanship, and optimizing product details to provide every customer with reliable and aesthetic home furnishing choices.
At this year’s Cologne exhibition, we will bring our brand-new seasonal furniture series, classic best-selling products and optimized customized solutions. From modern minimalist styles to cozy daily home styles, every piece is carefully designed and strictly manufactured to meet the diverse needs of global families and commercial spaces.
This exhibition is a wonderful opportunity for us to connect with more global customers, share creative home design ideas, and build closer international cooperation relationships. We can’t wait to meet new friends, communicate with industry partners, and show the world the charm of high-quality Chinese furniture manufacturing.
If you are in Cologne for the exhibition, come and visit us! Let’s talk about home aesthetics, latest furniture trends and future cooperation possibilities. 🤝

21/09/2026

Sourcing Big-Size Gaming Chairs? Look at MC1039-1 First

Big-size gaming chairs are easy to buy. Ones that still hold their rating after a year of daily use are harder to find.

Sell into internet cafes, home gaming setups or live-streaming rooms and you've heard the same complaint: the seat sags, the armrests wobble, the base creaks. Usually it isn't the foam. It's the frame, the mechanism, or the gas lift.

We're Anji Maochang Furniture, a chair factory in Anji County, Zhejiang Province. MC1039-1 is the model we put in front of buyers who need a heavy-duty big size gaming chair. Here's what's on it:

• Product size: W74 x D80 x H126–132 cm, so the seat is genuinely wide — not a standard frame with a "big size" label on it
• 180-degree reclining backrest with a soft back cushion
• 4D adjustable armrests
• Foldable footrest
• Frog-type multifunctional mechanism
• Class 3 gas lift
• Carton size 82 x 60 x 53 cm, 260 pcs loading quantity
• PU, metal and plastic construction
• Suited to gaming, home, live streaming and internet cafe use

Weight capacity is the number most spec sheets skip. The MC1039 big size platform is rated to 150 kg, and the MC1040 gaming sofa carries the same 150 kg rating. If your market skews toward taller or heavier users, that rating is what decides how many chairs come back to you.

Certification is usually where an order slows down, so here it is up front. MC1039 is tested to EN 1335-1:2020 and EN 1335-2:2019-04 for the EU market (report RED250415073002ED-AMR, issued by RED Laboratories Inc.). The factory holds an amfori-BSCI Code of Conduct audit, no. 25-0358113, from Eurofins CPA, valid through November 2026. And MC196-2-1 and MC196-3-1 are covered by a design patent, ZL 2025 3 0581799.7, issued by CNIPA.

Want to compare inside the range? These are the models buyers ask about most: MC1039-1, MC1039, MC1040, MC1034, MC196-4, MC196-3-1 and MC1025. MOQ starts at 50 units, lead time runs 30–40 days, monthly capacity sits around 6000 units, and OEM/ODM is open on logo, color, size and design. Samples are available if you'd rather sit in one before committing.

Ross Chen takes the inquiries: [email protected], WhatsApp +86 18357006883.

One thing I'm curious about — when your buyers look at a big chair, do they ask for the weight rating first, or does price still win the conversation?

18/09/2026

Which Gaming Chair Fits a Small Apartment?

Before you compare colors or RGB lighting, there's a plainer question: will it actually fit?

Picture a studio apartment — desk against one wall, bed behind it, maybe 60 cm of floor in between. That's the reality for plenty of first-time gaming chair buyers. And it's where two chairs from the same category start to behave very differently.

MC196-4, a game chair with spider element styling, measures W68 x D69 x H122-132 cm.
MC196-2-1, the exclusive game chair model, measures W70 x D70 x H118-128 cm.

Two cm wider. One cm deeper. About four cm lower overall. Sounds like nothing — until you're sitting in a narrow room, where it becomes the difference between rolling out from your desk cleanly and bumping the bed frame every time you stand up.

Height deserves a second look too. If you play under a sloped ceiling or a low window sill, that 128 cm top on MC196-2-1 buys you a little headroom.

Then there's getting it through the door. Both ship one piece per carton:
MC196-4 — 75 x 36 x 56 cm
MC196-2-1 — 75 x 65 x 34 cm

Same 75 cm length, different cross-section. And that cross-section is usually what decides whether a box walks up your stairwell or gets stuck in the elevator. MC196-2-1 uses a detachable powder-coated metal base, built to reduce packaging size.

Buying more than one? Loading quantity is 447 pcs for MC196-4 and 410 pcs for MC196-2-1, one piece per carton.

A few other details that change how these two live in a tight space: MC196-4 has 2D adjustable PU-padded armrests and a spring-loaded seat cushion, while MC196-2-1 moves to 5D adjustable armrests and a seat cushion with forward-backward depth adjustment. Both have a retractable footrest, and MC196-2-1's backrest locks at three tilt angles — it also carries a registered design patent.

Both come from Anji Maochang Furniture Co., Ltd., a chair factory in Anji County, Zhejiang, China that produces gaming chairs, office chairs and manicure chairs, established in 2016.

Ever tried to squeeze a chair into a space that was genuinely too tight? Tell us what you measured first — the room, the doorway, or the elevator — and drop your own dimensions in the comments if you want a second opinion on which one clears.

Anji M&C furniture Co.,Ltd.

09/10/2026

07/10/2026

06/10/2026

03/10/2026

30/09/2026

27/09/2026

24/09/2026

22/09/2026

21/09/2026

18/09/2026

Address

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Listing takedown request