工人堂

アクセス ウェブサイト

工人堂 墨付け、手刻、無垢材の仕事をする大工集団 営業時間:8:00~19:00
定休日:日曜日
工人堂は、墨付け・手刻みなど伝統的な木造建築にこだわります。無垢材を用いた新築・リフォームをはじめ、古民家再生や数寄屋建築なども得意とする大工集団です

墨付け材の一本一本、どの様に曲がっているかを見て何処に使うかを決めて番号を付けていく作業いわゆる番付材木に名前をつけて行く作業それと同時に継手や仕口を適材適所で考えて切る長さや加工する寸法を材に付けていく無垢材を使うなら番付は必要な作業だと...
16/10/2026

墨付け

材の一本一本、どの様に曲がっているかを見て

何処に使うかを決めて番号を付けていく作業

いわゆる番付

材木に名前をつけて行く作業

それと同時に継手や仕口を適材適所で考えて

切る長さや加工する寸法を材に付けていく

無垢材を使うなら番付は必要な作業だと考えています

要所に応じて仕様を変えれるのも手刻みの良さ

どんな建物にも対応出来る様に

日々、クオリティーを求めて仕事をする

それが我々のチームです

#工人堂
#ヤマサキ建築事務所

Marking

We examine how each piece of lumber curves

and decide where to use it, then assign a number to it.

This is what’s known as “numbering.”

It’s the process of assigning names to the lumber.

At the same time, we consider the best joints and connections for each piece

and mark the cutting lengths and dimensions to be machined directly on the lumber.

We believe that numbering is an essential step when working with solid wood.

One of the advantages of hand-carving is the ability to adjust specifications according to specific requirements

To ensure we can adapt to any type of building,

we strive for quality in our work every day

That is our team

墨付け、刻み 墨付けの真っ只中隣では刻みを進める手刻みの良い所は仕口、継ぎ手を適材適所で仕様を変えて出来る事少しでも良いと思う事は出来る限り取り入れていくその作業がとてもやり甲斐があって楽しい! #ヤマサキ建築事務所 #墨付け #手刻みMa...
16/09/2026

墨付け、刻み 
墨付けの真っ只中
隣では刻みを進める
手刻みの良い所は仕口、継ぎ手を適材適所で仕様を変えて出来る事
少しでも良いと思う事は出来る限り取り入れていく
その作業がとてもやり甲斐があって楽しい!

#ヤマサキ建築事務所
#墨付け
#手刻み

Marking and Carving
Right in the middle of marking
Next to me, the carving continues
The beauty of hand carving is that you can vary the joints and connections to suit the specific needs of each spot
If I think something is even slightly better, I incorporate it as much as possible
That process is incredibly rewarding and fun!

茶室水屋立って使う水屋簡略化せず本式でやりつつ使う人に合わせて造る新しい物を造るときは不安にあるけど出来上がった時の喜びは大きいそして毎回のように学びの瞬間があるだから大工は生涯勉強する事が出来ていつまでもレベルアップし続ける楽しくて仕方な...
07/07/2026

茶室水屋
立って使う水屋
簡略化せず本式でやりつつ
使う人に合わせて造る
新しい物を造るときは不安にあるけど
出来上がった時の喜びは大きい
そして毎回のように学びの瞬間がある
だから大工は生涯勉強する事が出来て
いつまでもレベルアップし続ける
楽しくて仕方ない
#工人堂
#ヤマサキ建築事務所


Tea Room Mizuya
A standing-style mizuya
We follow traditional methods without simplifying them,
while tailoring the design to the user’s needs.
I always feel a bit anxious when creating something new,
but the joy when it’s finished is immense.
And almost every time, there’s a moment of learning.
That’s why carpenters can keep learning throughout their lives
and continue to improve their skills indefinitely.
It’s just so much fun.

削ろう会三木大会に行って来ました!今回も大阪工業技術専門学校の引率今回の学生の部はレベル高かったです!そんな中で見事に2位に輝いてくれたのはとても嬉しい出来事でした他の学生達もすごく健闘してくれた私が普段から技術指導で心掛けている事は学生に...
14/06/2026

削ろう会三木大会に行って来ました!

今回も大阪工業技術専門学校の引率

今回の学生の部はレベル高かったです!

そんな中で見事に2位に輝いてくれたのは

とても嬉しい出来事でした

他の学生達もすごく健闘してくれた

私が普段から技術指導で心掛けている事は

学生に何かしらのスイッチがオンになるきっかけになれれば良いかなと思ってやっています

今回の削ろう会に参加して

次も参加したいって言ってくれて

なんだか嬉しい気持ちになりました

あと、私的には材の慣らし作業をやる合間に

どれだけ薄く削れるかを目標にしてやってますが

数字的には良かったですが厚みは斜めなってしまったのが残念でしたw

色々な方々とも出会えてとても充実した二日間でした!

関係者の方々本当にお疲れ様でした!
ありがとうございました!

#工人堂


Kezurou-kai
I went to the Miki Tournament!

Once again, I led a group from the Osaka College of Technology (OCT).

The level of competition in the student division was incredibly high this time!

Amidst that, it was a truly joyful moment
to see one of our students take second place.

The other students also put up a great fight.

In my daily technical coaching,
I always try to do my best in the hope
that it might serve as a catalyst to “flip a switch” for the students.

After participating in this Kezurou-kai,

they told me they want to join again next time,

which made me feel really happy.

Also, personally, while I was taking breaks from breaking in the wood,

I set a goal to see how thin I could shave it.

The thinness turned out well, but unfortunately, the thickness ended up slanted lol.

But that’s part of the fun, too.

I got to meet so many different people this time—it was a very fulfilling two days!

To everyone involved, thank you so much for all your hard work!
Thank you very much!

08/06/2026

茶室水屋腰板の蟻桟

12mmに仕上がった杉板の裏に蟻桟を仕込む

薄い板に蟻桟を硬く仕込み過ぎると桟の部分で折れ曲がってしまうので程よい硬さで仕込む

幅の広い無垢板は伸縮するので動いても割れない様な仕事にしておく事が必要

木と木を組む仕事はやっていて本当に楽しい

#工人堂
#大工手仕事
#ヤマサキ建築事務所

Ant-style battens for a tea room wainscoting

Installing ant-style battens on the back of 12mm-thick cedar boards

If the battens are secured too tightly to thin boards, the boards may bend at the battens, so they must be installed with just the right amount of tension

Since wide solid wood boards expand and contract, it is essential to construct them in a way that prevents cracking even when they move

Working with wood is truly enjoyable

07/06/2026

茶室水屋 腰板の鉋がけ

幅530 mm、長さ2000 mm 厚さ12 mm

笹杢の赤杉を削るのは久しぶり

やはり赤杉の鉋がけは本当に難しい

逆目を止めようとすると艶が落ち

艶をを出そうとすると逆目が止まらない

鉋枕が出ない様に刃の調子を変えると

その差で艶にムラが出来る

思っていたよりも時間がかかってしまった

常にやってないと腕が鈍ってしまうと痛感した



Tea Room: Planing the Wainscoting
Width: 530 mm, Length: 2000 mm, Thickness: 12 mm It’s been a while since I last planed red cedar from Sasamoku.

Planing cedar really is difficult.

If I try to eliminate the grain, the sheen disappears,

but if I try to bring out the sheen, the grain doesn’t disappear.

If I adjust the blade depth to prevent the plane from catching,

that difference causes unevenness in the luster.

It took longer to finish than I expected.

I keenly realized that if I don’t practice constantly, my skills will get rusty.

回転柱片引きの建具を戸袋に収納する為の仕掛け何も無い様に見える柱が扉の様に回転して開くえ!?何これ!ってなる様な仕掛けの納まりをバッチリ納めれた時の達成感は最高に楽しい!これだから大工は面白い! #工人堂 #ヤマサキ建築事務所 Rotati...
30/04/2026

回転柱

片引きの建具を戸袋に収納する為の仕掛け

何も無い様に見える柱が扉の様に回転して開く

え!?何これ!ってなる様な仕掛けの納まりを

バッチリ納めれた時の達成感は最高に楽しい!

これだから大工は面白い!

#工人堂
#ヤマサキ建築事務所

Rotating Post

A mechanism for retracting a single-sliding door into its pocket

A post that looks like nothing special rotates open like a door

That moment when you pull off a design that makes people go, "Whoa! What is this?!"

The sense of accomplishment when you nail it is absolutely thrilling!

This is why carpentry is so fascinating!


枠の加工久々に一枚鉋で仕上げたやっぱり一枚鉋は艶が一段階上がる #工人堂 #大工手道具Finishing the FrameFinished it with a single-blade plane for the first time i...
22/04/2026

枠の加工

久々に一枚鉋で仕上げた

やっぱり一枚鉋は艶が一段階上がる

#工人堂
#大工手道具

Finishing the Frame

Finished it with a single-blade plane for the first time in a while

A single-blade plane really does take the finish to the next level


'sHandTools

R壁の吹抜け階段板幅、25㎜の大鋸目の板厚みは2種類ランダムに張ってジョイントもランダム階段の段鼻や蹴込み、壁との取り合い、フットライトの位置、始まりから終わりまで全てにおいて完璧な割付で張った圧巻!!苦労したけど最高にカッコいい空間になっ...
15/04/2026

R壁の吹抜け階段

板幅、25㎜の大鋸目の板

厚みは2種類

ランダムに張ってジョイントもランダム

階段の段鼻や蹴込み、壁との取り合い、

フットライトの位置、始まりから終わりまで

全てにおいて完璧な割付で張った

圧巻!!苦労したけど最高にカッコいい空間になった

#工人堂
#ヤマサキ建築事務所


Open-riser staircase on the R wall

25mm-wide boards with large saw marks

Two different thicknesses

Installed randomly with random joints

From the stair nosings and risers to the transitions with the walls,

the placement of the under-stair lighting, and every detail from start to finish—

everything was laid out with a perfect layout

Absolutely stunning!! It was a lot of work, but the result is an incredibly cool space


釘〆  長弘 作ただの釘〆 されど釘〆手に取った時の何とも言えないフィット感良い道具は使い心地は勿論の事やはり見ているだけでも良い道具 #工人堂 #大工手道具Nail Setter by OsahiroJust a nail setter....
07/04/2026

釘〆  長弘 作

ただの釘〆 

されど釘〆

手に取った時の何とも言えないフィット感

良い道具は使い心地は勿論の事

やはり見ているだけでも良い道具

#工人堂
#大工手道具

Nail Setter by Osahiro

Just a nail setter...

Yet, it is a nail setter

That indescribable sense of fit when you hold it in your hand

Good tools are not only a pleasure to use

But they are also a joy to simply look at


's Hand Tools

住所

Neyagawa-shi, Osaka

アラート

工人堂が新しいニュースやキャンペーンを投稿したら、いち早くメールでお知らせします。メールアドレスが他の目的に使われることはなく、いつでも配信を停止できます。

ショートカット

共有する