Ray seven technology

free gift charger cable worth Ksh 250. Why should I give you? Comment Yako ikinifurahisha nakupatia free. Let's go

Considerations on machine installations
Ensure your wireman is electrical competent

Mind:
- *Dedicated circuit*:

Use a separate breaker rated for the motor’s load. Most grain grinders need 15–20A, 220–240V in Kenya

- *Proper earthing*:

Connect the machine frame to earth to prevent shock. Test with a multimeter

- *Cable & plug*

: Use heavy-duty cable rated above motor current. No exposed wires. Plug should fit the socket tightly — no adapters

- *RCD/GFCI protection*:

Install a residual current device on the supply. Trips if there’s leakage

- *Lockout/Tagout*:

Add an isolator switch near the machine so it can be fully disconnected during maintenance

Let you your machines operate on separate circuit with auto breakers. All protections circuits should be made with respect to the correct current ratings and grouping factors of conductors . Make sure you have a competent wire man ! Should I put down my microphone or should I increase the volume?

New arrivals 20,000 mAh power bank with FREE 6A USB data cable This week. Tulisema ushagoo hakuna kupeleka simu center uchajiwe !! Ji sort na hii kwa Ksh 2500 pekee na ukuwe on k**a mwezi !!
This round ni mwecheche !! Whatsapp 0717011567

Onother cause for your tv breakdown is an overloaded extension! If you can separate your power circuit, assign one separate socket on the wall to power the tv through a tv guard. The other socket can them be extended to other loads like chargers .
Make sure there are no frayed or interlocked cables . Make the arrangements neat and clear . Follow us for more safety and maintenance tips

HERE WHY YOUR HEATER'S PLUG MELT BY THE PINS .
1. LOOSE SOCKET
Your socket connectors have loosened ! The sparks generates heat that melts the pin
2. CORRODED PINS .
check on your heater's plug If the pins are corroded
3. WRONG EXTENSION
you may be using a low current rating extension.
4. FAKE PLUG
your may have bought a fake plug . Fake plugs are cheap . There are special plugs designed for heating appliances. Follow us for more updates about genuine and fake accessories and fittings
5. OVERLOAD
your supply might be overloaded. The conductors supplying current are therefore not able to carry sufficient current to run the load ! Follow us for more updates on circuit safety and precautions

How do you know if the charger cable you bought is genuine or fake ?
1. Mind the cost ! Cheap cables are always fake !
2. Light! The core copper current carrying conductors are thin and fake . Original cable are heavy
3. Packaging ! Check on brand logoo
do this three things to make your charge cable last longer.
1. Use a long cable . 100cm and above
2. Insert cable into the charging port at 90°
3. Don't bent your cable in charging mode