Industrial Safety & Technical Training Institute

ways to improve your &
Follow all safety procedures and rules your employer has in place.
Insist on receiving proper training.
Report any hazards.
Keep your work area clean and tidy.
Wear protective clothing that has been provided.
If you have an illness or condition, make sure your supervisor is aware of it.
Discuss any concerns you may have with your health and safety representative.
Take your work seriously.
If you are involved in an accident, report it immediately.
at work, on everyt work. safety

Make sure in and

A few important , basic knowledge, keep

H2s is #Dangerous, #life is #precious. Use all #H2s safety #gear for your #safework practices.

Health and at work, all are necessary.

Shout out to my newest followers! Excited to have you onboard!

Gohar Ali Khan, Zeeshan Sheikh, Saifullah Saifi, Jamil Khan Khan, Bilal Arain, Zia Ullah, Sajid Ktk, Asmat Khattak, قاری سعید احمد چشتی, Shifa Khattak, Ishaq Khattak, Muhammad Faraz, Hafiz Muhammad Nazeer, Javed Khattak, Riaz Pathan

Understanding Risk Levels! Check out this handy risk assessment chart to evaluate potential hazards. From “Rare” to “Almost Certain” and “Low” to “Critical” consequences, it helps you gauge the severity. Stay informed and prepared! Learn
Keep
Spread about

Beautiful view at Dongpu lake

U.S. anti-fall safety belt ANSI/ASSE Z359
standard processing
Anti-fall safety belt is an important equipment for the life safety of high-altitude workers. It is widely used in construction, power maintenance, exterior wall cleaning and other high-altitude work scenarios. Through a reasonable structural design, it connects the human body with the fixed point, limits the falling distance of people in the event of an accident, and effectively avoids casualties caused by high-altitude falls.
Standards in the United States-> it is indispensable to be certified according to the ANSI/ASSE Z359 standard. The main test items are as follows:
1. Strength test: simulate the impact force when falling from a high altitude, carry out tensile and tear tests on the seat belt as a whole and each part, check whether the seat belt can withstand the specified strength, avoid breakage, damage and other failures, and ensure reliable protection at critical moments.
2. Comfort test: By simulating the scene of long-term wearing, evaluate the comfort of wearing the seat belt, check whether it will cause local pressure on the body, and adjust whether the parts are easy to operate, so as to reduce the risk of operators' unwillingness to use it due to wearing discomfort.
3. Connection parts test: Test the opening and closing durability and locking reliability of hooks, locks and other connecting parts to ensure that the connection is stable during use and will not be accidentally loosened, so as to ensure the safety of operators.
4. Identification and description test: Check whether the safety belt product identification is clear, including production information, scope of application, usage methods and precautions, etc., to ensure that users can accurately understand the product characteristics and correct usage methods.
Familiar with the ANSI/ASSE Z359 standard, it is not only responsible for the safety of high-altitude workers, but also helps the smooth compliance flow of safety in the world as well.
Anti-fall belt -altitude work